REP PR-5000 V2 Power Rack
The PR-5000 V2 is our top of the line power rack system and allows for virtually limitless configurations and attachment setups. Featuring 3x3" 11-gauge steel with oversize 1" diameter hardware, this is the type of rack found in universities, professional athletic facilities, and commercial gyms that are serious about strength training. In a home gym, it's all you'll ever need.
The 4-way laser-cut hole design gives you limitless possibilities in configuring your attachments to suit your space.
NOTE: Please reference our dims photo (above) for the full length, width and height of the rack, as well as how the attachments alter the footprint of your custom build!
PR-5000 V2 vs. PR-4000 Comparison: HERE
Features Include:
- Laser-cut numbering on the front and back of uprights and each side of crossmembers for ease of lining up j-cups, safeties, and other attachments.
- 1" diameter hardware for the ultimate in peace-of-mind under heavy load.
- 2" hole spacing throughout entire rack.
- Large logo brace with stainless steel faceplate for additional rigidity and side-to-side stability.
- Stainless steel accents on j-cups and other attachments for a high-end classic look.
- Exclusive attachments taking advantage of the 1" diameter holes.
- All attachments include protective liners to protect bar knurl and/or paint on your uprights where appropriate.
- Rated to 1500lbs.
Lat/Low Row Attachment:
- Lat/Low row attachment is currently now available for both 93" and 80" uprights/configurations. If you order an 80" rack, the 93" lat/low attachment will NOT be compatible. Vice versa, if you order an 93" rack, the 80" lat/low row attachment will NOT be compatible. Please make sure you double check that you are ordering the correct lat/low row height for your rack!
- 80" lat/low attachment NOW AVAILABLE.
- If you have purchased a 100" rack, a lat/low row attachment not available.
- Uniquely shaped base stabilizer for removing the need to bolt down 41" depth, and also serves as an anchor point for the pulley system and low row foot plate. *REQUIRED FOR LAT/LOW ROW PULLEY SYSTEM.
- Improved lat pull-down/low-row with foot brace to help brace legs during low row. *LAT/LOW ROW UNIT SOLD ON THIS PAGE ALSO INCLUDES THE REAR BASE STABILIZER. PR-5000 V2 Lat/Low Row Assembly Instructions
Optional Upgrades:
- Leg Roller: single pad provides a stabilization point for single leg movements or hip bridges, get 2 to keep you seated during heavy lat pull-downs.
- Dip Attachment with bolt-together design for less shipping cost on our most popular attachment.
- Band pegs - Set of 4 for adding band resistance to your barbell workouts.
- Landmine attachment for multiple uses including many core movements.
- Weight horns with new urethane coating that makes them longer-lasting and better able to protect your plates. 12" size is great for larger iron plates and bumper plates, while 6" is ideal for 10 lb and less iron or change plates.
- Front Foot extension for working outside the rack without bolting down. Allows you to add spotter arms off the front of the rack and have dedicated setups for benching and squatting without changing j-cup or safety height.
- 24" Spotter arms with protective plastic liners.
- Lowered J-cup option effectively allows 1" hole spacing on the uprights by holding your bar 1" lower than our standard or flat-sandwich j-cups. You must have a pair of standard or flat-sandwich in combination with a lowered j-cup pair to achieve this effect.
PR-5000 ASSEMBLY INSTRUCTIONS
Assembly difficulty: Medium, 45min - 90min
PR-5000 ASSEMBLY VIDEO
REP PR-5000 V2 Power Rack
In Stock
$751.00