REP PR-4000 Power Rack
The PR-4000 is a heavy-duty, 1,000 lb rated commercial-grade power rack featuring 3x3” 11 gauge steel with 1” hole spacing through the bench zone and 5/8” pin holes. If you're looking for a "never need to upgrade" home gym power rack, or a centerpiece for your commercial facility weight room, this is it.
The PR-4000 re-defines customizability: You're no longer stuck with a pre-configured power rack and overpaying for options. Choose the components you want from our large selection of stock inventory, and have them delivered to your door in about a week or less! Multiple color, height, and depth options combine with an ever-expanding list of accessories and attachments to create the only power rack system you'll ever need. Every rack comes with our top rear logo cross-member which serves as a convenient anchor point for future attachments you may want to add, and from there the rest of the rack is up to you.
NOTE: Please reference our dims photo (above) for the full length, width and height of the rack, as well as how the attachments alter the footprint of your custom build!
PR-4000 vs. PR-5000 Comparison: HERE
REP Raw Cut Video A raw look at the REP PR-4000 with close up shots and details highlighting many of the various reasons why this power rack should be on the top of your list!
PR-4000 Rack Assembly Instructions
Lat/Low Row Attachment:
- Lat/Low row attachment is currently ONLY available for 93" uprights. If you order an 80" rack, the 93" lat/low attachment will NOT be compatible.
- 80" lat/low attachment will be available in May 2020.
- Improved lat pull-down/low-row with foot brace to help brace legs during low row. *LAT/LOW ROW UNIT SOLD ON THIS PAGE ALSO INCLUDES THE REAR BASE STABILIZER. PR-4000 Lat/Low Row Assembly Instructions
Rear Base Stabilizer:
- Uniquely shaped base stabilizer for removing the need to bolt down 41" depth, and also serves as an anchor point for the pulley system and low row foot plate. *REQUIRED FOR LAT/LOW ROW PULLEY SYSTEM.
- If you've already purchased the rack and Rear Base Stabilizer, you can purchase the Lat/Low Row separately on its own product page.
Front Foot Extensions and Spotter Arms:
- If you want to use Spotter Arms outside of your rack, you must either purchase the Front Foot Extensions or bolt down your rack.
PR-4000 ASSEMBLY INSTRUCTIONS
Assembly difficulty: Medium, 45min - 90min
PRINTABLE ASSEMBLY INSTRUCTIONS
Note: the assembly video says "PR-5000" but the instructions are exactly the same for the REP PR-4000 power rack. Follow these step-by-step instructions, so you can start lifting in your new rack ASAP.
PR-4000 ASSEMBLY VIDEO
REP PR-4000 Power Rack
Out of Stock
$623.00
Heavy Duty 3x3" 11-gauge power rack with 1 inch hole spacing throughout the bench area.