4-Way Laser-Cut Holes
1" Hardware
Numbers on Each Hole
REP PR-5000 V2 Power Rack
The PR-5000 V2 is our top of the line power rack system and allows for virtually limitless configurations and attachment setups. Featuring 3x3" 11-gauge steel with oversize 1" diameter hardware, this is the type of rack found in universities, professional athletic facilities, and commercial gyms that are serious about strength training. In a home gym, it's all you'll ever need.
The 4-way laser-cut hole design gives you limitless possibilities in configuring your attachments to suit your space.
NOTE: Please reference our dims photo (above) for the full length, width and height of the rack, as well as how the attachments alter the footprint of your custom build!
PR-5000 V2 vs. PR-4000 Comparison: HERE
Features Include:
- Laser-cut numbering on the front and back of uprights and each side of crossmembers for ease of lining up j-cups, safeties, and other attachments.
- 1" diameter hardware for the ultimate in peace-of-mind under heavy load.
- 2" hole spacing throughout entire rack.
- Large logo brace with stainless steel faceplate for additional rigidity and side-to-side stability.
- Stainless steel accents on j-cups and other attachments for a high-end classic look.
- Exclusive attachments taking advantage of the 1" diameter holes.
- All attachments include protective liners to protect bar knurl and/or paint on your uprights where appropriate.
- Rated to 1500lbs.
Lat/Low Row Attachment:
- Lat/Low row attachment is currently now available for both 93" and 80" uprights/configurations. If you order an 80" rack, the 93" lat/low attachment will NOT be compatible. Vice versa, if you order an 93" rack, the 80" lat/low row attachment will NOT be compatible. Please make sure you double check that you are ordering the correct lat/low row height for your rack!
- 80" lat/low attachment NOW AVAILABLE.
- If you have purchased a 100" rack, a lat/low row attachment not available.
- Uniquely shaped base stabilizer for removing the need to bolt down 41" depth, and also serves as an anchor point for the pulley system and low row foot plate. *REQUIRED FOR LAT/LOW ROW PULLEY SYSTEM.
- Improved lat pull-down/low-row with foot brace to help brace legs during low row. *LAT/LOW ROW UNIT SOLD ON THIS PAGE ALSO INCLUDES THE REAR BASE STABILIZER. PR-5000 V2 Lat/Low Row Assembly Instructions
Optional Upgrades:
- Leg Roller: single pad provides a stabilization point for single leg movements or hip bridges, get 2 to keep you seated during heavy lat pull-downs.
- Dip Attachment with bolt-together design for less shipping cost on our most popular attachment.
- Band pegs - Set of 4 for adding band resistance to your barbell workouts.
- Landmine attachment for multiple uses including many core movements.
- Weight horns with new urethane coating that makes them longer-lasting and better able to protect your plates. 12" size is great for larger iron plates and bumper plates, while 6" is ideal for 10 lb and less iron or change plates.
- Front Foot extension for working outside the rack without bolting down. Allows you to add spotter arms off the front of the rack and have dedicated setups for benching and squatting without changing j-cup or safety height.
- 24" Spotter arms with UHMW liners.
- Lowered J-cup option effectively allows 1" hole spacing on the uprights by holding your bar 1" lower than our standard or flat-sandwich j-cups. You must have a pair of standard or flat-sandwich in combination with a lowered j-cup pair to achieve this effect.
In Development:
- Adjustable ISO Lever Arms - $399
- Belt Squat Attachment (Patent Pending) - $279
Stainless steel finishes for a high-end, classic look.
Stainless Steel Finishes
Easy-to-adjust, these nylon straps will protect your barbell during your heaviest lifts.
Strap Safeties
Urethane-coated to protect your plates for a lifetime.
Weight Horns
Enhance your rack's versatility.
*Compatible with V2 only.*
Cable Pulley Attachment
Helps stabilize single leg movements, hip bridges, and seated lat/row.
Leg Roller
Squat or bench safely outside you rack with this attachment upgrade.
Spotter Arms
Utility Horn
Wide variety of possible uses. Store chains and bands, insert a pair into flip-down safeties or spotter arms to use as dip handles, or use one as an easy step-up to get an out-of-reach pull-up bar.
47" Width
47" outside-to-outside width. This is 1" narrower than most other racks on the market. The narrower width makes it easier to rack and unrack bars without knocking your weights into the uprights.
Stainless Steel
The highest-end finish available is now an option! Stainless steel is the most oxidation-resistant rack material out there, so if you're looking to invest for the long term, this is the most ideal option.
Rear Stabilizer Base
Our uniquely shaped base stabilizer removes the need to bolt down a 41" depth rack, and also serves as an anchor point for the pulley system and low-row foot plate. *The Rear Base Stabilizer will come included with purchase of lat/low-row attachment.*
Lowered J-Cup Option
The lowered j-cup option paired with the standard or flat sandwich j-cups creates 1” spacing throughout the power rack.
Front Foot Extensions
If you want to be able to work outside of your rack and not worry about bolting it down, these Front Foot Extensions are what you need! This accessory allows you to add spotter arms off the front of the rack and have dedicated setups for benching and squatting without changing j-cup or safety height.